Jump to content

Filters Position ICAST 2019.1

Recommended Posts



Hello to all

When inserting filters, should they be inserted:

Inside the housing (as above)?

Exactly with hosing walls?

Outside housing walls as below?



Best Regards


Uri Inbar 

Engineering Dep.

David Quality Castings Ltd.

Tel: 972-3-9024415 Mobile: 972-52-5261177 

Fax: 972-3-9024390

E-mail: uri.i@tirosh-casting.com

Web Site: http://www.tirosh-casting.com


Share this post

Link to post
Share on other sites



If you import your filter from the CAD, you can use its real shape:

  • Inside the housing (diameter filter < diameter channel): not the best solution because the metal can by-pass the filter
  • Exactly with hosing walls (diameter filter = diameter channel): the best solution
  • Outside housing walls (diameter filter > diameter channel): the metal is slowed down as the filter is filled first and once it is saturated the metal can flow.

I hope this helps.



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...