Jump to content
mpvnaresh

TSTEP is automatiocally adding in nonlinear quastatic analysis

Recommended Posts

Hi 

I am rinning a nonlinear quastatic analysis . I am putting it for solve its giving an error  

 *** ERROR # 1461 *** in the input data:
 Card "TSTEP(TIME)" is not allowed for this subcase type.

 

 the input data TSTEP is adding on its own .how to deactivate this .?

 

Share this post


Link to post
Share on other sites
On 4/12/2019 at 3:25 AM, mpvnaresh said:

Hi 

I am rinning a nonlinear quastatic analysis . I am putting it for solve its giving an error  

 *** ERROR # 1461 *** in the input data:
 Card "TSTEP(TIME)" is not allowed for this subcase type.

 

 the input data TSTEP is adding on its own .how to deactivate this .?

 

Hi ! 

TSTEP is for transient analysis. 

If you want to run Non Linear Quasi Static Analysis, NLPARM is sufficient :) 

Best regards ,

Share this post


Link to post
Share on other sites

Hi All

 

I did not create any TSTEP .I created a Non linear Quasistatic solution ,and exported(solver deck file).

In the FEM file i observed a TSTEP card  is added.For all the solution (Liner or Nonlinear )TSTEP is automatically added in the deck file.

After i delete the .tcl and .settings file from the documents , The problem got resolved.

  

Share this post


Link to post
Share on other sites
On 4/15/2019 at 11:16 PM, Farouk Maaboudallah said:

 

Pleace help me to solve this problem 

 
 *** ERROR # 1461 *** in the input data:
 Card "TSTEP(TIME)" is not allowed for this subcase type.
 

On 4/18/2019 at 10:28 AM, mpvnaresh said:

I did not create any TSTEP .I created a Non linear Quasistatic solution ,and exported(solver deck file).

In the FEM file i observed a TSTEP card  is added.For all the solution (Liner or Nonlinear )TSTEP is automatically added in the deck file.

After i delete the .tcl and .settings file from the documents , The problem got resolved.

tried this step also it doesn't work  kindly help me 

Non_Linear.fem

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...