Matteo95 0 Report post Posted April 15 Hello, Every time I try to run a topological optimization with Altair Inspire I have the same problem: the optimization seems done at 100%, while the software does not allow me to view the results because the run status is still running (picture). What is the problem? I am using the student version of the software. Thank you Quote Share this post Link to post Share on other sites
Nimisha Srivastava 5 Report post Posted April 27 Hi, Please share your model. Apologies for the late reply. Quote Share this post Link to post Share on other sites
Matteo95 0 Report post Posted May 2 Hello Nimisha, It is surely not a problem of the model, because on other devices the optimization run without problems. Anyway I share here the model with its optimization folder attached y-bracket.stmod y-bracket_(1)4-30-2019_11-17-55.zip Quote Share this post Link to post Share on other sites
scottbaker 0 Report post Posted May 3 I have this same issue with Inspire 2019. (those pics should be in the opposite order; aka, red x after the green '100%' status bar). Additionally, all analyses freeze at 64% and never complete. They eventually show up with a red x, as a failure. This happens with models I have created, and with those that I've dragged and dropped from the Inspire webinar course file folder "INSPIRE for Structural Analysis and Optimization -V2019" Exercise_1.stmod Quote Share this post Link to post Share on other sites
Rahul R 316 Report post Posted May 7 Please install the latest EDU version of Inspire(2019.0.1) and check again. Above shared y bracket file, runs fine at my end. Inspire Quote Share this post Link to post Share on other sites
Yifan Wang 0 Report post Posted June 30 I have exact the same problem and i already got the 2019.0.1 EDU version of Inspire. It seems to be a problem of Inspire 2019 in combination with a specific Hardware configiration. By the way, in version 2017.1 the same model runs perfectly. I am optimizing on the following computer: Windows 10 Professional version 1903 Intel Core i5 8600K @ 3,6GHz Zotac RTX2070 16 GB DDR4 RAM @ 2666 Hz everything is saved on a 500GB Samsung SSD 860 Evo Quote Share this post Link to post Share on other sites
Rahul R 316 Report post Posted July 1 Can you change the run directory (preferences: Run options : Run history path) and run again.If possible share .stmod file for quick look. Quote Share this post Link to post Share on other sites
Yifan Wang 0 Report post Posted July 2 It didn't work. Here is my file. Test_model.stmod Quote Share this post Link to post Share on other sites
Rahul R 316 Report post Posted July 2 I am able to run shared .stmod file with Inspire 2019.1 with slight modification.Is this happening for all Inspire optimization & analysis runs? If possible please share the license file you are using. Quote Share this post Link to post Share on other sites
Yifan Wang 0 Report post Posted July 3 Yes it is happening with all optimization runs. Here is my license file. altair_lic.dat Quote Share this post Link to post Share on other sites
Rahul Ponginan 276 Report post Posted August 28 Hi Yifan, All Can you please make sure there is no space or special characters in the username in windows? let us know if this solves the issue Quote Share this post Link to post Share on other sites
batman 0 Report post Posted September 19 I have the exact same issue on 2019.0.1 EDU. My username is "FIRSTNAME LASTNAME". Does the space count as a special character? Regardless, changing my username is not really a solution as making that change would require me changing login accounts and everything on my PC. Is there a solution to this issue?? Thanks. Quote Share this post Link to post Share on other sites
batman 0 Report post Posted September 21 I also attempted making account 'CADuser' and still have issue running optimization Quote Share this post Link to post Share on other sites
Benjamin Sharp 0 Report post Posted October 17 Has this problem been solved by anyone? I am having it as well, after downloading Inspire today. I have a student license and have been trying to run through an Altair optimization tutorial with a pre-loaded part. Need this program for multiple projects, so I would love to find a solution. Thanks Quote Share this post Link to post Share on other sites