Jump to content
Reid WU

Stator magnetic field does not go through airgap

Recommended Posts

Hello, 

I've modeled a synchronous reluctance machine by Flux 2D. The machine was built and meshed. The simulation was performed. But the stator magnetic field (a figure is attached) does not go through airgap and the rotor part. The obtained torque is zero but the stator currents (three phases) were good. 

So does anyone know the possible reasons, please?

 

stator magnetic field.JPG

Share this post


Link to post
Share on other sites

Hello Reid,

Please, verify the materials properties of the rotor part, it really seems that your rotor is made of non-magnetic material and that is the reason why the magnetic induction is avoiding it. In order to verify this a representation of the magnetic induction is maybe easier to interpret than the representation of the magnetic potential.

Hope this helps.

Best regards,

Share this post


Link to post
Share on other sites
 
 
1
1 hour ago, Alejandro Rodríguez said:

Hello Reid,

 

Please, verify the materials properties of the rotor part, it really seems that your rotor is made of non-magnetic material and that is the reason why the magnetic induction is avoiding it. In order to verify this a representation of the magnetic induction is maybe easier to interpret than the representation of the magnetic potential.

 

Hope this helps.

 

Best regards,

 

 Thank you for your reply. 

 I've checked the rotor material. It's ok. 

 

 Best regards.

Share this post


Link to post
Share on other sites

You are welcome.

If the material is not the problem I will need the project in order to help you further.

If you want and the project is not confidential, please attach it to this topic and I will check it.

Best regards,

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...