Jump to content
Sign in to follow this  
Alex Nguyen

How to remesh after change MC option

Recommended Posts

Hi every one. I'm a newbie with SimLab. I have problem with re-mesh after modify value MeshControl (MC).

First, I create Mesh Control by IsoLine with as video. Next, I change value in MC, and I use option "Remesh" to operate mesh.

But, the mesh seem not like request in MC (after modify). Do I have to delete all mesh and re-operate again or do anything else?

Thanks for interested

Best Regards

Share this post


Link to post
Share on other sites

Hi, I am not able to see your video. 

 

Hope you have follow below steps, please correct me if wrong.

  • You have applied the Isoline mesh control to a CAD body and generated surface mesh on it.
  • Then you have modified the existing Isoline mesh control that applied on CAD body and you have tried remeshing corresponding FEM faces. this wont work.

 

Because, the modified mesh control still is on  CAD and you remeshed FEM faces. For this case, you have apply a new isoline mesh control on FEM faces and then perform remesh for those faces. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...