Jump to content
jegan260

Mesh Flow improvement in BatchMesh

Recommended Posts

Hi,

I've prepared the criteria file for performing batch mesh operation. I've made some continous improvements and feature capture and Quality were improved. But I can't improve the flow. There are many opposite trias in the mesh (As shown in the attached picture). Even I've enabled  Aggresive Tria Reduction. It doesn't give me the flow I'm looking for. I'm sharing the .param file for your reference. Kindly check and let me know if there are any improvements need to be done. 

 

image.thumb.png.c0e9413e620fe4293cfbd9237b55509f.png

 

Thanks and Regards

Jegan.Test_10mm.param

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...