Jump to content

Recommended Posts

Hi everyone, 

 

I am new to lattice optimization, and i want to control the diameter beam size and have a better understanding of CLEAN option.

 

If i understood well, CLEAN option can be used with MinRad to delete beams under the radii defined in MinRAD.

 

- When i don't touch the lattice parameter panel, CLEAN is set to YES by default and clean beams with very small radii (E-05 mm) at the end of phase 2

- When i use only MinRad (2mm) and CLEAN set to NO,  it get all the beams above the radius defined.

 

- But when i use Minrad with a radius of 2mm and CLEAN set to YES, it has trouble creating a feasible design. Is it because CLEAN option only works with very small radii  ? It doesn't simply delete beam under MinRad in the end of optimization? 

 

For information, my mesh size is 5 cm, and my objectif is to create à structure with big enought beam, but with less beam without changing the mesh.

 

Thank you in advance. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...