Jump to content
alpha

How to check time-step in SL(Radioss/LSdyna)?

Recommended Posts

Hi,

 

I am running some drop test for electronic cover parts (Radioss).

However, I have not found any tool to check time step in SL.

 

May I know your advice on this?

Thanks

Share this post


Link to post
Share on other sites

In HM, after assign Material or Property for my parts (2D & 3D), I can check the estimated time step. But I do not know how to do in SL.

This is very important function for impact analysis to reduce computation time.

399901607_nh.thumb.png.e60b6637ffd24f6faed0f96a1d5f8113.pngHope this is clear for you.

 

Share this post


Link to post
Share on other sites

Hello Alpha

 

Thanks for your explanation.

 

Currently in SimLab you can check the time step using the Quality Check tool from Mesh > Verify > Quality.

 

After applying Material & Properties, select the bodies and check the time steps based on the appropriate element types.

 

Picture1.png.f55db549c9ba49fe4591642de68fe8c7.png

 

 

Kindly let us know if you have any concerns.

 

 

Thanks & Regards

Nantha Kumar N

Share this post


Link to post
Share on other sites

×
×
  • Create New...