Jump to content

Extremely difficult to create Flat Blank surface from lines

Recommended Posts

Hi everyone,
Normally, when we running the forming analysis for some part, we will run feasibility first and try-out then.
OneStep analysis provides a flatten Blank, but only in bounding lines, not surfaces.

Then we need to use InspireForm to create the blank surface wireframe.
However, it is Extremely Difficult to do this.
IF always requires us to build another sketch, not directly fill in the lines to create the surfaces.
But the sketch sometime doesn't capture the points well.

We also cannot use "patch" tool in this case, because patch tool doesn't work with free lines.

Meanwhile, HyperMesh can do this very well.

So can anyone teach me how to create the surface efficiently with InspireForm?
I'm struggling with it.

Attached is the cad file of blank wireframe.
Thanks in advance!


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...